How to get started with SVN integration? Follow
I spent a lot of time trying to get PHPStorm 8.0 working with my SVN server, and got nowhere. I tried to figure out how to do it reading the helpfiles, which I did not find helpful at all. It's like a puzzle with a thousand pieces. Somehow the descriptions hardly match what I see on my screen, maybe I'm looking in the wrong places ... And I get error messages such as "unknown error", or no error message at all, simply being sent back to the previous input screen after entering a password, no hint of what's wrong, etc.
Is there a documentation somewhere of how this is supposed to work? With screenshots and examples?
Any help appreciated.
Please sign in to leave a comment.
Nothing - except for the information provided in Help.
And what do you see in your screen? Please attach screenshots
Screenshots of the errors plus you idea.log would be helpful. What SVN version do you work with? What protocol is being used?
Thanks for your reply. I would not know where to start with my screenshots. I go to a help page, try to do what´s described there and often don´t find it, or sometimes something similar with a different name. But then I don´t know if that´s actually the same. I´d have to redo the whole thing to get those shots. But then I´ll have to redo it anyway, on a second PC.
About the SVN version and protocol: I have no idea. How do I find out about that? So far I used TortoiseSVN and used right mouseclick menu commands only. Very simple.
Error messages: I´ll try to set up now and then shoot screens as they pop up.
ok, I tried again an kept lab notes with screenshots. I´d be glad if you had a look at it. Maybe it helps you understand the difficulties I´m facing and you can tell me what I´m doing wrong and maybe can give me hint, maybe point me at the right help page.
In this process I only accessed help once. Not helpful.
You must have associated your project with subversion (VCS/Enable version control integration or VCS/ImportIntoVersionControl/Share Project main menu item)
Because nothing has been added to the repository? :) Check the Changes toolwindow: Local tab shows all the files that can be added to svn or committed. For unversioned files Add is available, for modified files Commit is available.
well... CVS is itself a revision control system (see http://en.wikipedia.org/wiki/Concurrent_Versions_System). Sure it has nothing to do with subversion, and attempts to configure CVS roots won't help you to set up SVN integration...
There are several way to enable SVN integration for your project:
1)To import the existing unversioned project into some svn repository you can use VCS/ImportIntoVersionControl/ImportIntoSubversion... action (action doesn't create a working copy, so you need to check out the project to the new location later) or VCS/ImportIntoVersionControl/Share Project (Subversion)... action (recommended; this action createas the local copy in the current folder, no extra checkout is necessary). The repository folder will be created by these operations. Then you can commit the files that should be added there.
2) To get the project from the repository and create working copy you need to check it out: use VCS/CheckOutFromVersionControl/Subversion... or VCS/BrowseVCSRepository/BrowseSubversionRepository... On check out performing, you can select the desired workin copy format. (1.6,1.7,1.8).
When the process is completed you are prompted to create WebStorm project from the checked out sources. The svn integration is enabled for the created project automatically.
3) To enable svn integration for some existing project (based on the svn working copy!) you can use VCS/EnableVersionControlIntegration action or
create VCS mappings in Settings/VersionControl.
I can't comment on your 'unknown errors' - I need the idea.log. But I'm not sure it makes sence as your setup is a complete mess...
Thanks for your answers, I really appreciate it.
That´s exactly what I´ve been trying to do ...
(Empty messages: Posting my message failed several times with an error message. I retried first without then with changes until it finally worked - now this morning I see all attempts have arrived - without images ...)
(This was the message, just for the record: "The page you are looking for is temporarily unavailable. Please try again later.")
Well... Seems you do have a working copy created, and it's version is 1.8. Your log shows that the path to command line client is not set in Settings/Version control/Subversion:
com.intellij.execution.process.ProcessNotCreatedException: Cannot run program "svn": CreateProcess error=2, Das System kann die angegebene Datei nicht finden
That's your 'unknown error'. Please make sure to change 'svn' to a full path to your command line client (TortoiseSVN?). Then try once more to import your project using VCS/ImportIntoVersionControl/Share Project (Subversion)
seems TortoiseSVN doesn't have needed binaries, so it won't work... You can try a different client - http://www.collab.net/downloads/subversion, for example
Are you telling your developers to change that message to something useful, please?
Thanks very much for finding the source of the problem for me. Would never have guessed that. Perhaps you could point me at the part of the documentation that I should have read?
Actually I did not have any command line client installed. Never needed one. But now I reinstalled Tortoise with command line enabled. It was not even necessary to enter the complete path in phpStorm settings, just a check mark was enough.
VCS/ImportIntoVersionControl now behaved quite a bit different. I do find it confusing, that the UI magically adapts to certain changes of settings. This time I did not even have an option to select a directory or a file - I was asked for credentials and phpStorm immediately started sharing the whole project - not what I intended, takes forever. So I cancelled the procedure and found that I can right click on parts of the project tree in the main window and then use Subversion > Share Directory ... and then Subversion > Commit Directory ... to upload it.
Something to look out for, if another noob reads this: anything deleted in the "Changes" toolwindow will be deleted EVERYWHERE without a warning. I.e. gone from project, local disk and Remote host. I expected this to be for the repo only. Learning the hard way.
(actually, not everywhere: it stays on the repo ... the only place where I wanted to remove that directory from ... And, actually, there is a popup, asking for permission to delete, but it does not mention what exactly it plans to delete ...)
So one more question, Elena: How do I remove/uncommit something from the repo? You are always welcome to point me at a relevant part of your docs/Web Help.
Oh no, next desaster: I tried the Subversion menu with a right click on an item in the Changes toolwindow, and now a dialog pops up for each individual file within that directory - no way to stop it. Spending the next half hour clicking the Cancel button. Or maybe 5 minutes of holding the ESC key.
Anyway. Otherwise I think that I now have a lot to play with and figure out how to use SVN with phpStorm without destroying both ...
yes, it does, see my previous reply, please.
After about half an hour of committing, the attempt ended with a connection interrupt by the host computer: [Image 03]
Failed to commit. Will send log. Any idea?
03 failed to commit.png
file deleted from the working copy (i.e. deleted in the "Changes" toolwindow) is deleted locally but also scheduled for deletion from repo upon the next commit.
You can also use the repository browser to remove files from the repository
No ideas. Please enable additional logging as follows:
actually looks like the svn issue. See https://subversion.open.collab.net/ds/viewMessage.do?dsForumId=3&viewType=browseAll&dsMessageId=457936, for example
That report was for a large file that caused the problem. I have no such files. Will test again now with your debug settings and send you the log.
I tried again, but no error this time. I did exactly the same as before, and the directory was uploaded within seconds. The only thing that happened inbetween the tests, where I think it could matter, is that I restarted the PC.
Repository browser was a good keyword, thanks.
Only one problem I had with it: it only lets me delete one file or directory branch at a time. No multi-select. So to delete several files I'd still have to use Tortoise. Or is there an option I overlooked?
Then, I found this. Worth promoting a bit:
Update: I've given up. Maybe others will have more luck with SVN+PhpStorm. For me, every attempt ended with an "Unknown Error" somewhere. Finally I switched to Git. The settings for Git are scattered all over the place in PhpStorm, and I hope it will get cleaned up in future versions. But at least I had no "Unknown Error", and the basic functions that I've been using so far seem to work fine.